gp10-4002, GP10-4003, gp10-4004, gp10-4005, gp10-4006, gp10-4007 www.vishay.com vishay general semiconductor revision: 13-oct-15 1 document number: 87651 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 glass passivated junction plastic rectifier features ? superectifier structure for high reliability application ? cavity-free glass- passivated junction ? low forward voltage drop ? low leakage current ? high forward surge capability ? solder dip 275 c max. 10 s, per jesd 22-b106 ? aec-q101 qualified available ? - automotive ordering code base p/nhe3 ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in general purpose rect ification of power supplies, inverters, converters and freewheeling diodes for both consumer, and automotive applications. mechanical data case: do-204al, molded epoxy over glass body molding compound meets ul 94 v-0 flammability rating base p/n-e3 - rohs-co mpliant, commercial grade base p/nhe3 - rohs-compliant, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? e3 suffix meets jesd 201 class 1a whisker test. he3 suffix meets jesd 201 class 2 whisker test polarity: color band denotes cathode end note ? for part numbers with e suffix, they are-e3 commercial grade only primary characteristics i f(av) 1.0 a v rrm 100 v to 1000 v i fsm 30 a i r 5.0 a v f 1.1 v t j max. 175 c package do-204al (do-41) diode variations single die do-204al (do-41) superectifier ? maximum ratings (t a = 25 c unless otherwise noted) parameter symbol gp10-4002 GP10-4003 gp10-4004 gp 10-4005 gp10-4006 gp10-4007 unit maximum repetitive pe ak reverse voltage v rrm 100 to 1000 (fig.5) v maximum average forward rectified current ? 0.375" (9.5 mm) lead length (fig. 1) i f(av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 30 a maximum full load reverse current, full cycle average, 0.375" (9.5 mm) lead length at t a = 75 c i r(av) 30 a operating junction and storage temperature range t j , t stg -65 to +175 c
gp10-4002, GP10-4003, gp10-4004, gp10-4005, gp10-4006, gp10-4007 www.vishay.com vishay general semiconductor revision: 13-oct-15 2 document number: 87651 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, pcb mounted note (1) aec-q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - maximum non-repetitive peak forward surge current electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol gp10-4002 GP10-4003 gp10-4004 gp 10-4005 gp10-4006 gp10-4007 unit maximum instantaneous forward voltage 1.0 a v f 1.1 v maximum dc reverse current at rated dc blocking voltage t a = 25 c i r 5.0 a t a = 125 c 50 typical reverse recovery time i f = 0.5 a, i r = 1.0 a, ? i rr = 0.25 a t rr 3.0 s typical junction capacitance 4.0 v, 1 mhz c j 8.0 7.0 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol gp10-4002 GP10-4003 gp10-4004 gp10-4005 gp10-4006 gp10-4007 unit typical thermal resistance r ? ja (1) 55 c/w ordering information (example) preferred p/n unit weight (g) preferred pa ckage code base quantity delivery mode gp10-4002-e3/54 0.335 54 5500 13" di ameter paper tape and reel gp10-4002-e3/73 0.335 73 3000 ammo pack packaging gp10-4002he3/54 (1) 0.335 54 5500 13" diameter paper tape and reel gp10-4002he3/73 (1) 0.335 73 3000 ammo pack packaging 2 0 4 0 6 0 8 0 1 00 1 20 1 40 1 60 1 80 0 0 .2 0 .4 0 .6 0 .8 1 .0 ambient temperature (c) average forwa rd r e ctified current (a) g p10-4002 thru g p10-4007 60 hz re s i s tive or inductive load 0.375 " (9.5 mm) lead length 1 1 0 1 00 1 0 5 1 5 2 0 2 5 3 0 number of cycle s at 60 hz peak forward s urge current (a) t j = t j max. 8.3 m s s ingle half s ine-wave g p10-4002 thru g p10-4007
gp10-4002, GP10-4003, gp10-4004, gp10-4005, gp10-4006, gp10-4007 www.vishay.com vishay general semiconductor revision: 13-oct-15 3 document number: 87651 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse characteristics fig. 5 - maximum re petitive peak reverse voltage, v rrm fig. 6 - typical j unction capacitance package outline dimensions in inches (millimeters) 0 .6 0 .8 1 .0 1 .2 1 .4 1 .6 1 0 100 1 0 .1 0 .01 in s tantaneou s forward voltage (v) in s tantaneou s forward current (a) g p10-4002 thru g p10-4005 g p10-4006 thru g p10-4007 t j = 25 c pul s e width = 300 s 1 % duty cycle 0 20 40 60 80 100 0.01 0.001 0.1 1 10 percent of rated peak rever s e voltage (%) in s tantaneou s rever s e current (a) t j = 125 c t j = 25 c t j = 75 c g p10-4002........ 100 v g p10-4003........ 200 v g p10-4004........ 400 v g p10-4005........ 600 v g p10-4006........ 800 v g p10-4007........ 1000 v 1 0 .1 1 0 1 00 10 1 100 rever s e voltage (v) ju nction capacita nc e (pf) t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p g p10-4002 thru g p10-4005 g p10-4006 thru g p10-4007 do-204al (do-41) 1.0 (25.4) min. 1.0 (25.4) min. 0.205 (5.2) 0.160 (4.1) 0.107 (2.7) 0.080 (2.0) dia. 0.034 (0.86) 0.028 (0.71) dia. ? lead diameter i s for s uffix e part number s 0.026 (0.66) 0.023 (0.58) note
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
